model AMP 150/2
high performance amplifier
Warranty.
All Elura products come with a 2
year limited liability warranty. This
warranty includes parts and labor re-
pairs on all components found to be
defective in material or workmanship
under normal conditions of use. This
warranty shall not apply to products
which have been abused, modified
or disassembled.
Warranty items
only by authorized resellers.
Warranty not eligible for products
purchased through non-authorized
online sellers.
A product that fails under condi-
tions other than those covered will
be repaired at the current price of
parts and labor in effect at the time
of repair. Such repairs are warranted
for 90 days from the day of reship-
ment to the BUYER. If the unit is
delivered by mail, customers agree
to insure the unit or assume the risk
of loss or damage in transit. Un-der
no circumstances will a unit be
accepted without a return authoriza-
tion number. The warranty is in lieu
of all other warranties expressed or
implied, including without limitations,
any other implied warranty or fitness
or merchantability for any particular
purpose, all of which are expressly
disclaimed. Proof of sale may be
required in order to claim warranty.
www.elura.audio
S/N:
4/8
Ω
NORMAL
BRIDGED
FR
LP
R+
R-
L-
L+
8
Ω
ONLY
-
+
ON
AUTO
POWER
MODE
IN
OUT
TRIGGER DC 12V
HP
BRIDGED
8
Ω
ONLY
SPEAKER OUTPUT
OUT
IN
L
BRIDGED
R
From audio source
to L/R input
High Pass
Position
Unscrew terminals and
remove the bridging clips
on the back of the speaker
Amplifier #1 feeds the tweeters
in the speaker system
Amplifier #1
Left speaker
terminal cup
Right speaker
terminal cup
S/N:
4/8
Ω
NORMAL
BRIDGED
FR
LP
R+
R-
L-
L+
8
Ω
ONLY
-
+
ON
AUTO
POWER
MODE
IN
OUT
TRIGGER DC 12V
HP
BRIDGED
8
Ω
ONLY
SPEAKER OUTPUT
OUT
IN
L
BRIDGED
R
Amplifer #2
Low Pass Position
From audio out of
Amplifer 1
Amplifier #2 feeds the woofers
in the speaker system
Bi-amping.
Bi-amping your speakers using two
AMP150/2 amplifiers is an excellent
and efficient way to get the most
out
of your speakers. In this case,
the
frequencies are crossovered in
the
amplifier and the speakers drivers are
fed the most power possible directly
to the tweeters and the
drivers. Each
speaker is driven by an amplifier
channel bypassing the crossover
components. While this setup can be
a little more complicated, the
performance is top notch!
Specifications.
Output Power:
150W x 2 @ 4Ω 1kHz
THD+N:
@4Ω=0.9%/ @8Ω=1.0%
Input Sensitivity:
600mV
Frequency Response:
10Hz - 20kHz
High Pass Filter:
150Hz - 20kHz /-3dB
Low Pass Filter:
10Hz - 150Hz / -3dB
Signal to Noise Ratio:
-75dB
Auto Turn ON:
5mV
Turn OFF Delay:
8min
Supply Voltage:
AC230V / 50Hz
AC110V / 60Hz
