EluneVision Reference Studio 4K Motorized Tab-Tensioned, Руководство пользователя

Страница: 8 / 15

ASSEMBLY
13
To mount a spring, you need to use the installation hook provided. Pull
the spring towards the glass rod. While pulling the spring, carefully and
slowly slide the hook part of the spring through the hole in the fabric and
hook onto the glass rod.
Inner Slot
Middle Slot
Outer Slot
See 4d.
4c.
ASSEMBLY
14
Repeat step b) and c) until you have mounted every hole in the fabric with
a spring, in a sequence shown in a).
If you have wrinkles on your screen fabric, first, consider fine adjustments.
Take off the spring(s) located in the area with wrinkles, evenly spread the
screen fabric across the frame, then remount the springs.
If wrinkles still exist, go back to Assemble-Screen Fabric, and repeat step
3a to 4f. Make sure parts are properly oriented and using the correct meth-
ods. Also make sure, you are using the correct sequence for mounting the
springs. If you need more tension on the fabric, please see next page.
You need to follow the sequence indicated above in a). This way,
you can minimize the unnecessary stress to the screen fabric.
You want to execute step c) with extra caution. When you let go
of the spring, you need to make sure the spring is only lying on
the glass rod, not the fabric.
The three slots are designed for the screen fabric to stretch at
different ambient temperature. If middle slot is too tight or loose
for your screen consider switching to a different slot.
After completing step 4d, you can now stand the screen up on its side as
shown below. Make sure the ground is free of obstacles and rough objects
before you do so. We recommend to stand the screen on a soft cushion in
addition to the floor cloth we provided to prevent damage to the screen as
well as the flooring.
Do not slide or drag the screen across the floor.
Have one person hold the screen upright by the aluminum frame on the
back and not by the fabric. Carefully inspect the front of the screen fabric.
The fabric must wrap around the Aluminum Frame so that the sleeve of
the fabric will not be shown over the 1/2” outer frame.
4d.
4e.
4f.
Make sure as to not hook the spring on the screen material as this
can cause it to rip. Only hook the spring around the rod to secure
the screen material.