2
Parts List
Controller Diagram
Ceiling Mounting
Bracket, QTY 2
To the Owner
Thank you for purchasing our line of screens, using our
excellent screen materials and design, to give you years of
trouble free enjoyment. Please take a moment to read this
user manual before installation to avoid any potential issues.
2 Remotes, IR and RF
Wall Control Panel
Concrete Expansion
Bolts, QTY 4
Washers, QTY 8
1 Meter Long Steel Threaded
Rods 8MM diameter, QTY 4
Nuts, 8MM diamter, QTY 16
5M Low Voltage Wire for Wall
Control Panel
3M Low Voltage 12V Trigger
Wire
1 Yellow Wand for Limit Switch
Adjustment
7
Wall Switch Connector
12V Trigger Connector
Program Button
Note:
1. Th
e remote must be within the eff ective range of the IR or RF sensor.
2. Receiver will go to original state within 10 seconds if no action is taken.
3. Only total of 20 IR or RF remotes can be programmed to the receiver.
4. Th
e maximum continous operation time of the motor is 5 min.
To add a remote to the controller or reprogram your controller:
Press program button, the signal LED will fl ash, then press the remote’s up
button, the LED will stop fl ashing. Th
e programming has fi nished.
To reset:
Press the program button for more than 4 seconds, the LED will fl ash, press
the program button once within 6 seconds, all codes are now deleted
