9-
Manual setting color
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button, and use the
DOWN
and
UP
buttons to select
(Dimmer) or
(strobe),
press the
ENTER
button to confirm and use the
DOWN
and
UP
buttons to adjust the value,
once selected, press the
ENTER
button to setup or automatically exit the menu mode
without any change after one minute. To go back to the last function without any change
press the
MENU
button.
Sound
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button, Use the
DOWN
and
UP
buttons to select the
(sound on) or
(sound
off).
Once selected, press the
ENTER
button to setup or automatically exit the menu mode
without any change after one minute. To go back to the functions without any change press
the
MENU
button
Sensitivity
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to adjust sensitivity of the
sound control from 0 to 100. Once selected, press the
ENTER
button to setup or
automatically exit menu mode without any change after one minute. Back to the previous
functions without any change press the
MENU
button.
LED display
Press the
MENU
button up to when
is shown on the display. Pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to select
(display
always on) or
(display off 20 seconds after exit menu) mode. Once selected, press
the
ENTER
button to setup or exit menu mode without any change after one minute. Back to
the functions without any change press the
MENU
button again.
Display Inverse
Press the
MENU
button until
is blinking on the display. Use the
DOWN
and
UP
buttons to select
(display normal) or
(display inverse), press the
ENTER
button to setup. Back to the functions without any change press the
MENU
button.
6-
○
3 Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
○
4 Microphone:
Receive music for the sound active.
○
5 DMX output:
For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
○
6 DMX input:
For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal
○
7 Mains input:
Connect to supply mains power for the next unit.
3.2 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by pressing the
ENTER
button and the display will blink. Use the
DOWN
and
UP
buttons to change the mode. Once the required mode has been selected, press
the
ENTER
button to setup or it will automatically return to the main functions without any
change after idling for one minute. To go back to the functions without any change press the
MENU
button. The main functions are shown below:
Содержание Stage Par 90 Cold White
Страница 2: ...1 14 ...
