Elumen8 ELUM430, Руководство пользователя

Страница: 12 / 24

www.prolight.co.uk Fury 200 DTW 2 Cell Blinder User Manual
12
Operating instructions
Dmx Sync
On
Lock
On
Dmx Sync
Off
Lock
Off
4) Dmx Sync
5) Lock
Dmx synchronisation:
To access the DMX sync setting, press the
“MODE” button until “7: Settings” is highlighted
on the OLED display. Press the “SET” button and
use the “UP” and “DOWN” buttons to select
“4) Dmx Sync” . Press the “SET” button and use
the “UP” and “DOWN” buttons to select between
“On” and “Off” . Press the “SET” button to enable
Dmx sync when yes is selected.
Please note: The DMX Synchronisation setting
should be set to on when using the built-in
presets via DMX to ensure the fixtures stay
synchronised.
Display lock:
To access the display lock setting, press the
“MODE” button until “7: Settings” is highlighted
on the OLED display. Press the “SET” button and
use the “UP” and “DOWN” buttons to select
“5) Lock” . Press the “SET” button and use the
“UP” and “DOWN” buttons to select between
“On” and “Off” . Press the “SET” button to enable
Display Lock when yes is selected.
Please note: After 30 seconds of inactivity the
display will lock. To unlock the menu hold the
“MODE”
and
“SET”
buttons for 3 seconds.
Factory
Yes
Factory
No
6) Factory
Factory reset:
Resets all the fixtures factory settings.
To access the factory setting reset, press the
“MODE” button until “7: Settings” is highlighted
on the OLED display. Press the
“SET”
button and
use the “UP” and “DOWN” buttons to select
“6) Factory”
. Press the
“SET”
button and use the
“UP” and “DOWN” buttons to select between
“Yes”
and
“No”
. Press the
“SET”
button to
perform the factory reset when yes is selected.