12
Factory Setting
Select
Factory Setting,
press the
ENTER
button to confirm, present mode will show on the display.
Use the
DOWN
and
UP
button to select the
No
or
Yes
(Switch back to default settings). To go back
to the functions without any changes press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for one minute to exit the menu mode.
4. How To Control The Unit
You can operate the unit by this ways: DMX controller
You do not need to turn the unit off when you change the DMX address, the new DMX address
setting will take effect immediately.
4.1 DMX Controller
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press MENU button to enter the menu mode, select
DMX Functions
and press the ENTER button
to confirm. Use the UP and DOWN buttons to select
DMX Address
, press the ENTER button to
confirm, the present address will blink on the display, use the UP and DOWN buttons to adjust the
address from 1 to 512, press the ENTER button to store. Press and hold the
MENU
button for
about one second or wait for one minute to exit the menu mode.
Please refer to the following diagram to address your DMX 512 channels for the first 4 units.
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
4 channels
1
5
9
13
9 channels
1
10
19
28
