9
Static Colour Mode
To select
Static Colour Mode
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button
to select
Color 1~Color 32
mode, do not press
MENU
as this action will exit stand-alone mode
selected, press
ENTER
to save. The fixture will remember the stand-alone mode set even after
a power off and back on cycle.
Colour Macro Mode
To select
Colour Macro
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to
select
Macro 1~Macro 7
mode, the seven Macro’s are all a colour scrolling fade with macro 1
the fastest and macro 7 the slowest, do not press
MENU
as this action will exit stand-alone
mode selected, press
ENTER
to save. The fixture will remember the stand-alone mode set
even after a power off and back on cycle.
Dimmer Curve
To select
Dimmer Curve
, press the
ENTER
button to show the
DIMMER CURVE
on the display, the
current setting will be highlighted on the display, use the
UP/DOWN
button to select
Linear
,
Square Law ,Inverse Square Law
or
S cure
. To go back to the functions without any changes press
the
MENU
button again. Press and hold the
MENU
button for about one second or wait for one
minute to exit the menu mode.
Square Law:
Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law:
Light intensity control is coarser at low levels and finer at high levels.
Linear:
The increase in light intensity appears to be linear as DMX value is increased.
S-curve:
Light intensity control is finer at low and high levels and coarser at medium levels.
