Elumen8 ELUM031, Руководство пользователя

Страница: 6 / 11

4.2 Easy Controller
The easy remote controller is used only in master/slave mode. By
connecting to the 1/4 microphone jack of the first unit, the remote
controller on the first unit will control all the other units in Stand by
and Mode Selection.
Stand By Blackout the unit
Function
1. Sync. Strobe
2. Async. Strobe
3. Sound Strobe
Show
1-4
1. Pan Index
2. Tilt index
3. Dimmer
Fade Speed
1.
Fast
2. Middle
3. Slow
Mode
Sound
(LED OFF)
Show
(LED
Slow
Blinking)
Show
(LED
Fast
Blinking)
LED ON
DMX Controller
By using a universal DMX controller to control the units, you will need
to set DMX address from 1 to 512 so that the units can receive DMX
signal. Press the
MENU button until DMX Address is showing on the
display. Press the ENTER button and the display will blink. Use the
DOWN and UP buttons to change the DMX 512 address. Once the
address has been selected, press the ENTER button to confirm.
Please refer to the below diagram to address your DMX512 channel for
the first 4 units
：
Channel
mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
9channel 1 10 19 28
12channels 1 13 25 37
14channels 1 15 29 43
16channels 1 9 17 25
28channels 1 29 57 85
4.3 DMX 512 Configuration
9 channels mode
：
Channel
Value
Function
1 000-255 Pan
2 000-255 Tilt
3
248-255 Open
240-247 Random Strobe
232-239 Open
190-231
Slow close
Fast Open
182-189 Open
140-181
Slow Open
Fast close
132-139 Open
16-131 Strobe(slow-fast)
000-15 Open
4 000-255 Red
5 000-255 Green
6 000-255 Blue
7 000-255 White
8 000-255 Dimmer
9
250-255 Stand By
210-249 NO Function
200-209 Reset All
090-199 NO Function
080-089 Disable Blackout while Pan/Tilt Move
070-079 Enable Blackout while Pan/Tilt Move
000-069 NO Function
12 channels mode:
Channel Value Function
1
Shutter Effect
0-019 Shutter closed
020-049 Shutter open
050-064 Strobe 1 (Faster to Slow)
065-069 Shutter Open
070-084 Strobe 2 (Faster to Slow)
085-089 Shutter Open
090-104 Strobe 3 (Faster to Slow)
105-109 Shutter Open