Elumen8 ELUM021, Руководство пользователя

Страница: 3 / 36

C 2C
1. Safety Instructions
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems .
—
Unpack and check carefully that there is no transportation damage before using the unit.
—
The unit is for indoor use only. Use only in a dry location.
—
Only to be installed and operated by qualified operators.
—
DO NOT allow children to operate the fixture.
—
Use safety cables when hanging the unit. Handle the unit by its base only and not its head.
—
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
—
Be sure that no ventilation slots are blocked, otherwise the unit will overheat.
—
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
—
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
—
Maximum ambient temperature TA: 40 . DO NOT operate when the temperature is higher.
—
DO NOT connect the unit to a dimmer pack.
—
Make sure there are no flammable materials close to the unit while operating to avoid a fire
hazard.
—
The unit’s surface temperature may reach up to 85 . DO NOT touch the housing with bare-hands
during its operation, and allow 15 minutes for cooling before replacing the lamp or maintenance.
—
Avoid any inflammable liquids, water or metal objects entering the unit. If this occurs turn off the
mains power immediately.
—
DO NOT operate in dirty or dusty environment, clean the unit regularly.
—
DO NOT touch any cables during operation as there might be a hazard of electric shock.
Please read the instructions carefully which includes important information
about installation, usage and maintenance.