Elumen8 ELUM021, Руководство пользователя

Страница: 16 / 36

C 15C
mode. (If the lamp is off via DMX signal, you can re-connect the DMX controller to make the lamp
switch on).
Off if DMX Signal is Lost — Lamp turns off when DMX signal is cut off.
Select Off if DMX Signal is Lost , press the ENTER button to confirm, the present mode will blink
on the display, use the UP / DOWN buttons to select Yes (Lamp turns off when DMX signal is cut
off), press the ENTER button to store. Press the MENU button back to the last menu or leave the
unit idle for one minute to exit menu mode.
Ignition Delay — Delay time between power on and lamp on
Select the Ignition Delay , press the ENTER button to confirm, the present mode will blink on the
display, use the UP / DOWN buttons to adjust the delay time from 0S to 255S, press the ENTER
button to store. Press the MENU button back to the last menu or leave the unit idle for one
minute to exit menu mode.
Low Power Delay — Delay time between reduced lamp power and shutter off of the unit
Select Low Power Delay , press the ENTER button to confirm, the present mode will blink on the
display, use the UP / DOWN buttons to adjust the delay time from 0S to 255S, press the ENTER
button to store. Press the MENU button back to the last menu or leave the unit idle for one
minute to exit menu mode.
Display Setting
Enter the menu mode, select Display Setting , press the ENTER button to confirm, use the
UP / DOWN buttons to select Display Inverse, Backlight Auto Off, Backlight Intensity or
Temperature.
Display Inverse
Select the Display Inverse , press the ENTER button to confirm, the present mode will blink on the
display, use the UP / DOWN buttons to select No (normal display) or Yes (inverse display), press
the ENTER button to store. Press the MENU button back to the last menu or leave the unit idle for
one minute to exit menu mode.