www.prolight.co.uk
Alu HEX Par 64
User Manual
4
DMX channel mode:
Operating in DMX control mode gives the user the greatest flexibility when it comes to customising
or creating a show. In this mode you will be able to control each individual trait of the fixture and each
fixture independently.
To access the DMX channel mode, press the
“MODE”
button on the rear of the unit to show
“CH:01”
on the LED display, then use the
“UP”
and
“DOWN”
buttons to set the desired DMX address of either
1, 3, 4, 5, 6, 7 or 9 DMX channel modes.
To set the units address, press the
“MODE”
button on the rear of the unit to show
“ADDR:001”
on the
LED display, then use the
“UP”
and
“DOWN”
buttons to set the desired address from
“001” - “512”
.
Press the
“ENTER”
button to confirm any settings.
To exit out of any of the above options, press the
“MODE”
button.
Technical specifications
Operating instructions
01 - Bracket
02 - Bracket tightening knobs
03 - Earth point
04 - Safety eye
05 - LED display
06 - Function buttons
07 - DMX input socket
08 - DMX output socket
09 - PowerCON in socket
10 - PowerCON out socket
11 - Fuse 2A 240V
In the box:
1 x fixture,
1 x 13A powerCON
mains cable &
1 x user manual
www.prolight.co.uk
MODE
ENTER
UP
DOWN
FUSE
2A/250V
SAFETY
EYE
DMX
IN
DMX
OUT
POWER IN
POWER OUT
PUSH
ALU HEX
PAR 64
06
04
06
11
03
09
07
08
10
01
02
