Step
➌
Attach Interface
Cable
Serial Interface
Attach the interface cable from the computer to
the RJ-11 serial interface connector on the right
side of the printer. For additional information
on serial cable wiring, refer to Appendix A -
Trouble Shooting.
Getting Started
6
980088-001 Rev. A
Step
➌
Close the top cover and lift the head latch so
that it engages the slots on both sides of the top
cover. Press down on both sides as shown to
lock the print head.
Tap the FEED control once, the POWER indi-
cator will switch to GREEN when the printer is
ready for printing.
Latches
Figure 2-5
Close The Cover
Operation
980088-001 Rev. A
15
