www.eltransbaterie.eu
page 15
Quick guide for TBA firmware V1.070
figure 55
figure 56
figure 57
figure 54
a) System information.
(figure 54)
This screen presents information connected with the model of the
tester, the unique identification number of the device, firmware version,
temperature of the chamber and the remaining time of blowing.
b) Clock settings.
(figure 55)
This function allows you to set the current date and time. The device
keeps date and time correctly without mains power supply for about
90 days. After this period the date and time should be set again. To set
the date and time, use the [F2] button and the adjuster, and confirm
the setting by pressing the [F3] - „OK” button.
c) Counter settings.
(figure 56)
This function allows you to set the mode of counting time during a
battery test.
If the parameter is set to: Backwards - the battery test time counts
down to „0”.
If the parameter is set to: Forwards - the battery test time counts to
a set value.
To change parameters, use the adjuster and the [F3] - „OK” button.
d) Language settings .
(figure 57)
This feature allows you to change the language in which information
is presented on the display.
To change parameters, use the adjuster and the [F3] - „OK” button.
TBA tester with firmware V1.070 is designed for three languages:
Polish, English and Romanian.
