- 5 -
2.
Automatic tuning - Press and hold
TUNING (6) / (7)
button until the frequency
displayed move up or down. Release the button. The tuner will scan and stop for the first
strong station. Repeat until the desired station is reached.
3.
Manual fine-tuning - Press
TUNING (6)
/
(7)
button repeatedly to adjust the
frequency by each step.
Volume Control
In radio mode, Press the
VOLUME (3)
/
(4)
button to adjust the volume level.
Achieve Optimum Reception
Extend the
FM antenna (5)
fully to increase reception sensitivity.
Program Preset Radio Stations
You can store up to 10 preset stations for radio.
1.
Tune in the station you want to preset.
2.
Press and hold the
SET (9)
button until the program number flashes.
Press the
SET (9)
button
again
to
store the station
.
3.
Repeat these steps to store additional stations.
Recall a Preset Station
In radio mode, press the
MEM (12)
button repeatedly to the program number of which the
desired station is stored.
SLEEP TIMER
In radio mode, you can use this function to turn off the unit automatically after a certain duration
(up to 90 minutes).
1.
Press the
SLEEP (8)
button, and
“
90
”
is
displayed.
2.
Press the
SLEEP (8)
button repeatedly to select
the duration: 90, 80, 70
…
. Each time the button is pressed, the duration is reduced by
10 minutes, until “OFF” is displayed.
3.
The radio will turn off automatically after the preset duration has elapsed.
4.
To check the remaining playing time, press the
SLEEP (8)
button once.
5.
To cancel the sleep function and continue to listen to the radio, press the
SLEEP (8)
button again and set the timer to
“OFF”. To turn off the radio immediately, press the
POWER (1)
button.
Care and Maintenance
Clean the cabinet with a soft cloth moistened with water or mild detergent. Do not use solvents
such as alcohol, benzene
or thinner, as they may damage the cabinet finish. Make sure to
disconnect the mains lead from the supply before cleaning.
