Eltorque QT50 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 62

background image

Introduction

User Manual QT50 Doc ID 1321 version 2.0 Sept. 2018

Page

11 of 62

About this user manual

This user manual describes the guidelines for installation, setup and operation of
QT50 in a valve control system. The valid products for this manual are listed in
Table 2: Product overview on page 6.

Chapter 1 introduces the product and this manual.
This chapter is intended for all reader groups.

Chapter 2 informs on health, safety and environment issues.
The reader group for this chapter is for supervisors, technical support and
technical management personnel.

Chapter 3 gives a product description including the mechanical construction of
the actuator, technical specifications and a functional description. There is also
an overview of technical issues that should be considered in the design and
planning phase for the installation.
The reader group for this chapter is supervisors, project and engineering
personnel.

Chapter 4 covers the mechanical installation on valves and the electrical
installation of power and control signal.
The reader group for this chapter is installation personnel.

Chapter 5 covers the use of the actuator such as how to use the manual
emergency operation. There is also an overview of error messages and a
troubleshooting overview.
The reader group for this chapter is operators.

Chapter 6 covers maintenance, inspection and repair of the actuator.
The reader group for this chapter is operators, technical support and
management personnel.

Chapter 7 gives more in-depth technical information on the product.
The reader group for this chapter is technical support and management
personnel.

Chapter 8 gives ordering information.
The reader group for this chapter is technical support and management
personnel.

Appendix A gives an overview of torque recommendations.
The reader group for this chapter is installation personnel.

Appendix B includes the document “Earthing Methodology in Maritime
Installations” The reader group for this chapter is installation personnel,
technical support and technical management personnel.

«
...
9
10
11
12
13
...
»

Содержание QT50































































Отзывы:

Нет отзывов

Похожие инструкции для QT50

Бренд: GE Страницы: 425

Бренд: Eaton Страницы: 86

Бренд: D+H Страницы: 36

Бренд: D-Box Страницы: 4

Бренд: D+H Страницы: 36

VLT AutomationDrive FC 302

Бренд: Danfoss Страницы: 128

VLT DriveMotor FCP 106

Бренд: Danfoss Страницы: 4

Бренд: Datalogic Страницы: 15

Бренд: fakro Страницы: 16

Бренд: e-BLEACH Страницы: 24

Бренд: Lamtec Страницы: 22

Бренд: Wang Страницы: 68

Бренд: NAVITAS Страницы: 14

Бренд: J+J Страницы: 4

Бренд: Val Controls Страницы: 6

Бренд: Climatisation Страницы: 52

Бренд: TECOM Страницы: 8

Bell & Gossett Technologic PPS

Бренд: Xylem Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды