____________________________________________________________________________
_____________________________________________________________________________
14 User manual, WOP-12ac
Figure 3 – General diagram of frequency channel closure in the range of 2.4 GHz
Example of channel allocation scheme between neighboring access points in frequency range of
2.4 GHz when channel width is 20 МHz, see Figure 4.
Figure 4 – Scheme of channel allocation between neighboring access points in the frequency range of
2.4 GHz when channel width is 20 MHz
Similarly, the procedure of channel allocation is recommended to save for access point allocation
between floors, see Figure 5.
Figure 5 – Scheme of channel allocation between neighboring access points that are located between
floors
When width of used channel is 40 MHz there is no non-overlapping channels in frequency range
of 2.4 GHz. In such cases, you should select channels maximally separated from each other.
Figure 6 – Channels used in range of 5GHz when channel width is 20, 40 or 80 MHz
3.5
The device installation
The device is attached to pole/pillar or wall in accordance with the safety instruction and
recommendations listed above.
