____________________________________________________________________________
_____________________________________________________________________________
12 User manual, WOP-12ac
3
INSTALLATION ORDER
This section defines safety rules, installation recommendations, setup procedure and the device
starting procedure.
3.1
Safety rules
1.
Do not open the device chassis. There are no user serviceable parts inside.
2.
It is required to cover unused antenna connectors by safety cover included in the device
delivery package.
3.
Do not install the device during a thunderstorm. There is a risk of being struck by
lightning.
4.
You must follow requirements for voltage, current and frequency specified in the user
manual.
5.
Measuring devices and computer must be grounded before connecting to the device.
Potential difference between cases of equipment and measurement devices must be no
more than 1 V.
6.
Check the cable integrity and security of mounting to the connectors.
7.
Do not install the device near heat source and at places where temperature may fall
below -40°С or higher 60°С.
8.
You should satisfy established standards and requirements for working at height during
the device installation on the high-rise constructions.
9.
The device exploitation should be performed by engineering and technical personnel with
special training.
10.
Connect only to operational service equipment.
