WB-2P-LR5. User manual
54
•
•
•
•
•
•
•
SSH:
SSH
– is a secure device remote control protocol. As opposed to Telnet, SSH encrypts all traffic being transferred
including passwords.
To enable the device access via SSH protocol, select the corresponding checkbox.
To apply a new configuration and store settings into the non-volatile memory, click the
'Apply'
button. To discard
changes click the
Cancel
button.
5.4.3
The «Log» submenu
In Log submenu you may configure output for various debug messages intended for device troubleshooting.
Debug information may be provided by the following device firmware modules:
Networkd Log – deals with the device configuration according to the configuration file.
Configd Log – deals with the configuration file operations (config file reads and writes from various
sources) and the device monitoring data collection.
Networkd Log
Log output
– log messages output direction:
Disabled
– the output is disabled;
Syslog
– messages are output to remote server or local file via syslog protocol (for protocol
configuration, see below);
Console
– messages are output to the device console (requires connection via COM port adapter);
Telnet
– messages are output to the telnet session; create telnet protocol connection first.
