ELTEX STATICJET RX22, Руководство по эксплуатации

Страница: 8 / 24

8
BA-en-2083-1909_RX22
2. Safety
The units have been designed, built and tested using state-of-the-art engi-
neering, and have left the factory in a technically and operationally safe
condition. If used improperly, the units may nevertheless be hazardous to
personnel and may cause injury or damage. Read the operating instruc-
tions carefully and observe the safety instructions.
2.1 Identification of risks and hazards
Possible risks and hazards resulting from the use of the units are referred
to in these operating instructions by the following symbols:
Warning!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in serious personal injuries.
Caution!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in damage to property.
2.2 Contact protection
As the site of installation and/or use of the units is outside the control of
Eltex, contact protection against inadvertent contact of the emission tip by
personnel as specified by the employers’ liability insurance association
have to be provided (e.g. DGUV V3 in Germany). Contact protection
made of conductive material must professionally be grounded.
2.3 Technical advance
The manufacturer reserves the right to make changes to the technical
specifications without prior notice in order to adapt the units to state-of-
the-art engineering. Eltex will provide the latest information on any
changes or modifications in the operating instructions on request.
2.4 Proper use
The RX22 Ion Blower Unit STATICJET must be used only for discharging
static charges from material surfaces. Other uses are not permitted.
The manufacturers will not assume any liability and warranty if the units
are used improperly or outside the intended purpose.
Modifications or changes made to the power supplies are not permitted.
Use only original Eltex spare parts and equipment.