ELTEX NV-711, Руководство пользователя

Страница: 53 / 54

User manual for NV-711, NV-711-Wac 53
APPENDIX A
PROGRAMMING INSTRUCTIONS FOR THE REMOTE CONTROL
To control a TV using the remote control supplied with the set-top box, you must assign the functions
of the TV remote control buttons to the set-top box's remote control buttons in the TV CONTROL area. Only
buttons of TV CONTROL area are used to control TV: TVIN, V -, V+ — figure 17.
Figure 17 — Remote control
To program the remote control buttons, do the following:
1. Press and hold "SET" button for 3 seconds. The red led on the remote control will light up, indicating
that you have entered the button programming mode.
2. Press the button you want to program. The red indicator will blink.
3. Point the infrared transmitter of the programmable remote control at the TV remote control (keep
the remotes at a distance of 3-5 cm) and press the button on the TV remote control whose functions
you want to transmit.
4. After programming the remote control buttons, the led flashes three times, and then begins to glow
continuously. Now you can select other buttons for programming.
5. After programming the remote control buttons, press "SET" button to exit the button programming
mode. The red led will be turned off.