____________________________________________________________________________________
____________________________________________________________________________________
44
NTU
Optical Network Terminals
4.3.4
The “Wireless Bridge” submenu. Wireless Connection Settings in Bridge Mode
Use this menu to specify access point operation mode: either access point or wireless bridge.
When the bridge mode is used, MAC addresses of remote bridges should be specified. This mode is used
to establish a wireless connection between two individual networks.
In
Wireless/Bridge
mode, you can configure the following settings:
–
Bridge Restrict
—select bridge operation mode:
–
Enabled—
enable filtering for MAC addresses (only specified addresses are allowed);
–
Enabled (scan)
—search for remote bridges;
–
Disabled—
no restrictions for MAC addresses;
–
Remote Bridges MAC Address
—addresses of remote bridges.
Router does not support the Wi-Fi Multimedia (WMM) function in the bridge mode.
Click
Refresh
to refresh information on available remote bridges.
Click the
Apply/Save
button to accept and save the changes.