MES53xx, MES33xx, MES23xx Ethernet Switch Series
193
redistribute static [metric
metric
] [route-map
name
]
[subnets]
metric: (1..65535);
name: (1..255) characters
Import static routes to OSPF.
-
metric
- set the metric for imported routes;
-
name
- apply the import policy that allows filtering and
changes in imported routes;
-
subnets
- allows you to import subnetworks.
no redistribute static [metric
metric
] [route-map
name
]
[subnets]
Disable a specific function.
redistribute ospf
id
*nssaonly+ *metric
metric
]
[metric-type {type-1 |
type2}] [route-map
name
]
[match {internal |
external1 | external-2}]
[subnets]
id: (1..65535);
metric: (1..65535);
name: (0..32) characters.
Import routes from one OSPF process to another OSPF
process:
-
nssa-only
- set the value of nssa-only for all imported
routes;
-
metric-type type-1
– import with a stamp 'OSPF external
1';
-
metric-type type-2
import with a stamp 'OSPF external 2';
-
match internal
- import routes within an area;
-
match external-1
- import routes of the 'OSPF external 1'
type;
-
match external-2
- import routes of the 'OSPF external 2'
type;
-
subnets
- import subnetworks;
-
name
- apply the specified import policy that allows
filtering and changes in imported routes;
-
metric
- set the metric for imported routes.
no redistribute ospf [
id
]
[nssa-only] [metric
metric
]
[metric-type {type-1 |
type2}] [route-map
name
]
[match {internal |
external1 | external-2}]
[subnets]
Disable a specific function.
redistribute rip [metric
metric
] [route-map
name
]
[subnets]
metric: (1..65535);
name: (1..255) characters.
Import routes from RIP to OSPF.
-
metric
- a metric for imported routes;
-
name
- the name of the import policy that allows filtering
and changes in imported routes;
-
subnets
- allows you to import subnetworks.
no redistribute rip [metric
metric
] [route-map
name
]
[subnets]
Disable a specific function.
compatible rfc1583
-/enabled
Enable compatibility with RFC 1583 (for IPv4 only)
no compatible rfc1583
Disable compatibility with RFC 1583.
router-id
A.B.C.D
A.B.C.D: router ID in the
IPv4 address format
Assign router ID that uniquely identifies the router within an
autonomous system.
no router-id
A.B.C.D
Set the default value.
network
ip_addr
area
A.B.C.D
[shutdown]
ip_addr: A.B.C.D
Enable (disable) an instance of OSPF on the IP interface (for
IPv4).
no network
ip addr
Delete the IP address of the interface.
default-metric
metric
metric: (1..65535)
Set the metric for an OSPF route.
no default-metric
Disable the function.
area
A.B.C.D
stub
*no
A.B.C.D: router ID in the
IPv4 address format
Set the “stub” type for the specified area. An area is a set of
networks and routers that have the same ID.
-
no-summary
- do not send information about external
summary routes.
no area
A.B.C.D
stub
Set the default value.