ELTEX MES23xx Скачать руководство пользователя

Страница: 128 / 208

MES53xx, MES33xx, MES23xx Ethernet Switch Series

128

snmp-server host
{

ipv4_address

ipv6_address

hostname

} [traps | informs]

[version {1

| 2c | 3 {noauth |

auth | priv}] {

community

username

} [udp-port

port

]

[filter

filter_name

] [timeout

seconds

] [

etries

retries

]

hostname: (1..158)

characters

community: (1..20)

characters

username: (1..20)

characters

port: (1..65535)/162;

filter-name: (1..30)

characters

seconds: (1..300)/15;

retries: (0..255)/3

Specify the settings for ‘inform’ and ‘trap’ notification
message transmission to the SNMP server.
-

community

- SNMPv1/2c community string for notification

message transmission;
-

username

- SNMPv3 user name for authentication;

version

– define the ‘trap’ message type: trap SNMPv1, trap

SNMPv2, trap SNMPv3;
-

auth

– specify the packet authenticity w/o encryption;

noauth

– do not specify the packet authenticity;

priv

- specify the packet authenticity with encryption;

port

- UDP port of the SNMP server;

seconds

- confirmation timeout after which an ‘inform’

message will be re-send;
-

retries

- number of attempts to send an ‘inform’ message if

no confirmation is received.

no snmp-server host
{

ipv4_address

ipv6_address

hostname

}

[traps | informs]

Remove the settings for ‘inform’ and ‘trap’ notification
message transmission to the SNMPv1/v2/v3 server.

snmp-server engineid local
{

engineid_string

| default}

engineid_string: (5..32)

characters

Create the local SNMP device identifier engineID.
-

engineid_string

- name of the SNMP device;

default

- when this setting is used, engine ID will be created

automatically based on the device MAC address.

no snmp-server engineid local

Remove the local SNMP device identifier engine ID.

snmp-server sourceinterface
{traps | informs}
{gigabitethernet

gi_port

tengigabitethernet

te_port

fortygigabitethernet

fo_port

port-channel

group

loopback

loopback_id

| vlan

vlan id

}

vlan_id: (1..4094);

gi_port: (1..8/0/1..48);

te_port: (1..8/0/1..24);

fo_port: (1..8/0/1..4);

loopback_id: (1..64);

group: (1..16).

Specify a device interface whose IP address will be used as
the default source address for message exchange with the
SNMP server.

no snmp-server
sourceinterface *traps |
informs]

Delete a device interface.

snmp-server
sourceinterfaceipv6 ,traps |
informs}
{gigabitethernet

gi_port

tengigabitethernet

te_port

fortygigabitethernet

fo_port

port-channel

group

loopback

loopback_id

| vlan

vlan id

}

vlan_id: (1..4094);

gi_port: (1..8/0/1..48);

te_port: (1..8/0/1..24);

fo_port: (1..8/0/1..4);

loopback_id: (1..64);

group: (1..16).

The same for IPv6.

no snmp-server source-
interface-ipv6 [traps |
informs]

Delete a device interface.

snmp-server engineid remote
{

ipv4_address

ipv6_address

hostname

}

engineid_string

hostname: (1..158)

characters;

engineid_string: (5..32)

characters.

Create the remote SNMP device identifier engine ID.
-

engineid_string

- identifier of the SNMP device.

no snmp-server engineID
remote {

ipv4_address

ipv6_address

hostname

}

Remove the remote SNMP device identifier engine ID.

snmp-server enable traps

-/enabled

Enable SNMP trap message support.

no snmp-server enable traps

Disable SNMP trap message support.

snmp-server enable traps ospf

-/enabled

Enable sending SNMP trap messages of the OSPF protocol.

no snmp-server enable traps
ospf

Disable sending SNMP trap messages.

snmp-server enable traps ipv6
ospf

-/enabled

Enable sending SNMP trap messages of the OSPF protocol
(IPv6).

no snmp-server enable traps
ipv6 ospf

Disable sending SNMP trap messages.

Содержание MES23xx

















































































































































































































Результаты поиска

Содержание MES23xx

Отзывы:

Похожие инструкции для MES23xx

Бренды по названию

Популярные бренды

ELTEX MES23xx, Руководство по эксплуатации

Результаты поиска

Содержание MES23xx

Отзывы:

Похожие инструкции для MES23xx

Бренды по названию

Популярные бренды