ELTEX MA4000-PX Скачать руководство пользователя страница 179

Страница: 179 / 181

User Manual, Part VI 179

Subscriber access/aggregation node МA4000-РХ

50.4

ONT Firmware Manual Update

This method is used to update the ONTs which are activated at the time of update.

To perform a forced update of an ONT, use the

update ont

command with the ONT's ID and name

of the ONT firmware file available in PP4X storages:

ma4000# update ont 0/0 ntp-rg-r3.20.2.123.fw.bin
Task for updated successfully created. ONT firmware will be updated in 20 minutes
or more

A task will be created to update the ONT firmware with the specified ID. The task will end with an

error for ONTs which are not connected.

50.5

Configuration of ONT Firmware Auto Update

50.5.1

ONT Auto Update Modes

ONT auto update has two modes: immediate and postpone.

Step 1. Activate the update mode by the

firmware ont auto update

command:

ma4000# firmware ont auto update postpone

Step 2. Apply the changes by using the

commit

command:

ma4000# commit

You can view the configured mode with the help of the

show firmware ont auto update state

command:

ma4000# show firmware ont auto update state
Auto-update ONT: postpone

Step 3. To disable the ONT firmware auto update, use the

no firmware ont auto update enable

command:

ma4000# no firmware ont auto update enable

50.5.2

ONT Auto Update Rules

Step 1. Use the

firmware ont auto update add

command to add a new auto update rule.

Specify

the rule's unique name, ONT type (Equipment-ID), firmware version to be updated, name of the file in
the ONT firmware files storage to be used in the update, and the mode as parameters:

ma4000# firmware ont auto update add name2 NTP-RG 1.1.1 filename global

Содержание MA4000-PX






















































































































































































Результаты поиска

Содержание MA4000-PX

Отзывы:

Похожие инструкции для MA4000-PX

Бренды по названию

Популярные бренды

ELTEX MA4000-PX, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание MA4000-PX

Отзывы:

Похожие инструкции для MA4000-PX

Бренды по названию

Популярные бренды