ELTEX EXR130A, Руководство пользователя

Страница: 13 / 32

BA-en-3020-2101_R130A / R130A3L / R131A / EXR130A / EXR130A3L
13
3.4 Installation of the charging bar
Use flame-retardant GRP assembly material (rods and isolators) to attach
the charging bar to the machine. Examples for installation and notes are
given in Fig. 4, Fig. 5 and Fig. 6. The charging bar is bolted to the GRP
holders via sliding nuts pushed into one of the three profile flutings. Nor-
mally, the GRP rod is attached to the machine via a metal angle piece.
The charging bar is attached with the GRP holder to the machine wall.
The GRP holder is bolted with sliding nuts in the fluting of the charging
bar. Any of the three flutings may be used for installation.
Possible applications: Stabilizing material webs, reducing the air gap,
improving heat transfer.
The installation may also be carried out using fitting material supplied by
Eltex. The material consists of two insulators with GRP base plate plus
four sliding nuts with bolts. The insulators maintain the 150 mm creepage
distance.
Order No. for the Eltex assembly kit: BMO08613.
Fig. 4:
Installation
example showing
charging bar with
GRP holder,
charging against
earth (roller)
1 GRP rod
2 Bar
3 Creepage
distance
4 Machine wall
5 High voltage
cable with
protection tube
Z00
0
66
y
>200
>150
>150
1
2
3
4
5