ELTEC CYBOX GW 2-P, Руководство по установке

Страница: 21 / 22

13
CYBOX GW 2-P
e s
IN
ST
AL
LA
TI
O
N
M
AN
U
AL
4 MOUNTING
When mounting the CyBox GW 2-P please take the following aspects into account.
•
Do not install the device close to any sources of heat such as radiators or heat registers.
•
Keep the device away from any liquids and avoid exposure to dripping or splashing. The protection
class of the housing is IP40.
•
Keep a free space of at least 150 mm around the housing to ensure adequate heat dissipation
capabilities.
•
For optimal heat dissipation the connectors should face down.
•
The housing provides four mounting cutouts to install the device in horizontal or vertical orientation
on a flat and stable surface.
•
For fixation use M6 screws of sufficient length with additional M6 washers.
Figure 5 shows the outer dimensions of the housing including the position of the mounting cutouts.
Figure 5 Dimensions of the Housing