Eltax Vintage MTR 1959, Инструкция по эксплуатации

Страница: 4 / 11

6 7
CONNECTIONS
It is essential to connect the speakers using the correct polarity. Make sure to
connect the “ + ” terminal of the speaker (Red) to the “ + ” output terminal of
the amplifier. Then, make sure to connect the “- ” terminal of the speaker (Black)
to the “ - ” output terminal of the amplifier. A wrong connection would cause a
cribled stereo image and loss of bass. Use high quality speaker cable to perform.
BURN-IN PERIOD
When you take them out of the packaging, the Eltax loudspeakers are not yet able
to reproduce with the same efficiency all the sound frequencies they are supposed
to play. The loudspeakers are complex mechanical assemblies which need a
period of adaptation (“burn-in”) to operate at their best and become acclimatized
to the temperature and humidity conditions of your environment.
This burn-in period may last for some weeks, but you can quicken it by operating
the speakers between 100 and 150 hours consecutively, on a moderate volume
with a specific burning-in CD, or by broadcasting a radio station.
SPECIFICATIONS
EN
Type
Port
Power
Tweeter
Midrange
Woofer
Crossover - Fc
Frequency response (±3dB)
Recommended power amplifier
Sensitivity
Impedance
Terminal
Dimensions
Net weight
Finish
Compact loudspeaker - 3 way - Bass - reflex
Flared - front ported - Tuned Freq.: 32 Hz
150 W RMS
1” silk dome - neodymium magnet
4,7’’ coated cellulose pulp
12” cellulose pulp
630 & 3500 Hz - 12dB/12dB-12dB/12dB
40-22 000 Hz
50 - 200 W
90 dB/ 1W /1m
5-8 Ohms
Single wire
H600/650* x W380 x D302 mm (*) with tilted plinth
17,7 kg (unit)
Cabinet : walnut / front panel : dark grey
EN