Quick Start Guide Eltako GFVS-Safe IV
8
4.2.3 Select language
Change the language by using the menu option “System settings - Select language”. The GFVS must be
connected to change the language.
4.2.4
Network settings
Adapt the configuration of the network cards using “System settings - Network settings”.
The LAN interface is set up to operate in a network with DHCP.
4.2.5
Remote settings
A device-specific password was set in the as-delivered state. It is located on the rear of the device. It
can be overwritten by entering a new password.
Figure 7: Language selection
Figure 8: Network settings
Figure 9: Remote settings
