Quick Start Guide Eltako GFVS-Safe IV
6
4 First start-up
4.1
Start-up
Install the blue EnOcean, the black WLAN and the optional blue GSM antenna to the
connections provided (see Figures 1 and 2).
Plug the external power supply unit into a 230 V socket and connect it to the
GFVS Safe IV. The blue LED indicates power supply.
To configure the GFVS software, connect a monitor to the VGA or HDMI port and a keyboard
and mouse to the USB ports.
Alternatively, you can connect a PC via remote control (VNC) via network to the Eltako
GFVS-Safe IV and carry out configuration.
Then you can switch on the Eltako GFVS-Safe IV. During the run-up, you will see the dialog
below:
As required, you can switch to recovery mode to reset the system to factory settings. If you make no
subsequent input, the Eltako GFVS-Safe IV restarts after 10 seconds.
The Eltako GFVS 4.0 software is already installed and starts automatically after switch-on:
Figure 3: Start view
Figure 4: Start the Eltako GFVS 4.0-Software
