Eltako FJ62 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 12

Eltako FJ62 Скачать руководство пользователя страница 3

3

TEACH-IN - RUNTIMES –
SCENES – SCHEDULES

1. THESE ACTUATOR TYPES ARE COMPATIBLE WITH

MINISAFE2:

FSB61 / FSB14 / TF61J-230V / FJ62 / FSB71 / FTA65J / FTA55J / TF-TA65J /
FRM60 will not be dealt with in detail here since their end positions are set on
the motor.

2. TEACH-IN

Check that the motor wires (up and down) are connected to the correct terminals!
A shading actuator in MiniSafe2 must fi rst be taught in before it is used. Carry
out the teach-in procedure on the device itself. Each device has a
different teach-in procedure. The teach-in dialogues in the GFA5 app guide you
step by step through each procedure. If the device was already used, fi rst reset
it, see

"Resetting to factory settings"

.

First create an account in the GFA5 app and log in. The entry

"ADD DEVICE"

in

the main menu (top left) starts the teach-in process. Enter the device type in the
search window and then select a device from the devices listed. The next steps
are described in detail in dialogue texts in MiniSafe2 and are different for each
device. After a pairing process is successfully confi rmed in the app, assign a
device name so that you can fi nd it later in the app.

Set-up for shading actuators & GFA5

«
1
2
3
4
5
...
»

Содержание FJ62













Отзывы:

Нет отзывов