6
WALL MOUNTING
Before mounting ensure the desired location leaves enough room for access and maintenance. There are multiple mounting configurations make
sure you have decided on the most suitable before drilling any holes.
The back panel can be removed and offered up to the wall ensuring that is level. The mounting hole positions can now be marked and rear duct
entry if required.
Drill the marked holes and insert the supplied wall plugs.
Double check the holes line up with the rear panel and reassemble the unit in the desired configuration.
Lift the unit up and align the mounting holes with the wall plugs.
The supplied screws can then be screwed in securing the unit to the wall.
9
13
12
10
11
pencil
Rear inlet option.
