2
VERSIONS
STANDARD
External grille in high quality, impact and UV-resistant ABS colour RAL 9010.
category III conditions (contact opening distance equal to or greater than 3mm).
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• Do not obstruct the fan or exhaust grille to ensure optimum air passage.
• Ensure adequate air return/discharge into/from the room in compliance with existing
regulations in order to ensure proper device operation.
• If the environment in which the product is installed also houses a fuel-operating device
(water heater, methane stove etc., that is not a “sealed chamber” type), it is essential
to ensure adequate air intake, to ensure good combustion and proper equipment
operation.
INTRODUCTION
MORI HR is a continuously running, alternate flow supply and extract fan with heat
retention for use in habitable rooms such as; living rooms, bedrooms, dining rooms
basements and hallways. It is designed to ensure adequate ventilation in enclosed
environments. It is recommended that two units are installed in a pair: when one unit is
pulling, the other is pushing.
A pair of units can be installed in the same room or in different rooms (i.e. living room
and bedroom). The unit is suitable for installation on an outside wall.
To achieve the best possible ventilation the unit should operate
continuously, and only stopped for maintenance or service.
When heat exchange is not useful (for example in mid-seasons when
indoor and outdoor temperatures are similar) it is recommended to set the
unit in “extract-only” or “intake-only” mode and not switch the fan off.
• Inner ventilation unit material: high quality, impact and UV-resistant ABS colour RAL 9010.
• Design front cover removable for cleaning without the use of tools.
• Easy maintenance installation plate, for easy access to the heat exchanger from inside
the room.
• Anti-dust filter, easily removable for washing by the user without tools.
• Regenerative honeycombs ceramic heat exchanger.
• External grille in high quality, impact and UV-resistant ABS colour RAL 9010.
• High efficiency aerodynamic fan with “winglet” blades to optimise quietness and
efficiency.
• Single phase EC reversible Brushless motor with integral thermal protection.
• Motor mounted on high quality ball bearings.
• The unit is double insulated: no earth connection is required.
• Trickle speed selectable.
• Boost mode.
• Free-cooling (Bypass) mode.
• IPX4 degree of protection.
• Power supply 220V to 240V~ 50Hz.
TECHNICAL SPECIFICATIONS
Model
Airflow
l/s
Power
W
Weight
Kg
Mori HR 100
2,8/4,2/7
1,2/1,7/2,6
2
Mori HR 150
5,6/11,1/16,7 1,4/2,3/3,8
4,2
