www.elt.es
22
6.4. Corridor / Parking mode
In Parking operating mode, dimming takes place through the installation of a presence detection sensor. This
dimming method is suitable for street lighting in areas where high light levels are only required when some form of
presence is detected, such as in parks, car parking areas, cycle lanes, etc.
The eSMART technology control gear is able to connect presence detection sensors that return the detection signal
by means of a dry contact connected to the 1-10V control terminals, or via a voltage level that has to be connected
to the DALI control terminals. The type of output offered by the sensor to be used must first be selected using the
iSOFT configuration tool.
Other parameters to configure are the dimming levels of the standby and detection statuses, the transition times
between these statuses and the time it remains at detection level after which it fades out.
