8
Elektroniksystem i Umeå AB Industrivägen 12, 90130 Umeå, Sweden
E-mail:
Web:
Sensor configuration
All sensor settings can be configured via a smartphone application with NFC
(Near Field Communication) or over the air via the network server and downlink
data to the sensor. The sampling rate, spreading factor, encryption keys, port,
and modes can be changed. All sensor settings can be locked from the server or
NFC to make end-users unable to read or change settings on the sensor.
NFC Configuration
1.
Download ELSYS
“
Sensor Settings
”
application from Google Play or App
Store (from iOS 13) and install it on a smartphone or tablet. The device
must support NFC.
2.
Enable NFC on the device and start the application.
3.
Place your device on top of the EMS sensor to connect with the NFC
antenna.
You may need to remove the top cover and battery to get connection.
4.
Remove the device. Current settings will be displayed in the application.
5.
Use the application to change any settings if needed.
6.
Quickly tap the device on top of the EMS to give the new settings to the
sensor. Make sure that the application confirms your new settings.
7.
Wait for the sensor to reboot (5 sec), indicated by the LED flashing. Sensor
settings have been updated.
See the section
“
Help
”
in the application for more information.
Over the air configuration
All settings may be configured over the air via your LoRaWAN® infrastructure.
Please visit the support section on our webpage for more information regarding
downlink protocol.
Application parameters
All parameters
for the “Sensor settings” application
can be found in our settings
document. Please visit the support section on our webpage for more information.
