7
Elektroniksystem i Umeå AB Industrivägen 12, 90130 Umeå, Sweden
E-mail:
Web:
Installation
1.
Remove the front lid of the sensor by removing the four screws.
2.
Install the battery. The ELT Lite requires one AA battery. The battery
type is 3.6V Lithium Battery (ER14505).
Caution: Using batteries other than the ones provided may result in loss of performance
and battery life, and also damage to the device. Dispose of properly, observing
environmental protection rules.
3.
Connect any eventual external sensors.
4.
Close the lid and tighten the screws carefully. Make sure that the cable
gland and antenna connection is tightened to prevent ingress of
moisture.
5.
Mount the device by using the two holes on the sides.
