User Manual
- 3 -
B1 : SATA 15pin power connector
B2 : SATA 7pin data connector for HDD 0
B3 : SATA 7pin data connector for HDD 1
Safety Lock
Upper HDD Safety Lock & Lower HDD Safety Lock. (Push right to
open & push left to lock). See Picture C.
HDD Installing:
Open the upper & lower cover and put the HDD inside the cage. You
can install one HDD or two HDDs.
User Manual
- 4 -
Picture D
Hardware Installation Procedures
Please follow the following procedures to complete the hardware
installation:
1) Open the package and take out the product and make sure the
product is brand new and all the necessary parts are included.
If damage or shortage occurred, please contact your distributor
or where you bought.
2) Unlock the upper and lower covers (see picture C), push the lock
rightward and open the two covers and then, put the two 2.5"SATA
HDD inside the box(See Picture D).
3) After both HDDs installed, push both covers back like picture C and
