Elston Manufacturing S-N100, Руководство пользователя

Страница: 12 / 26

Installation
10
Figure 5 shows an S-N100 sander installed with the S10-02 mounting kit. The tires side of the sander is
hung from 2” x 2” square tube (part # S10-02-01) as indicated by A. The other side of the sander is hung
from an angle bracket (part # S10-02-03) as indicated by C. The S10-02-01 square tubing is then
mounted to the frame via 2 mounting brackets (part # S-10-02-02) as indicated by B.
Figure 6: S-N861 Sander installed with custom angle brackets
Figure 6 shows an S-N861 sander tank mounted with customer fabricated angle brackets (A).
If existing suspension parts attached to the frame interfere with mounting, the side of the sander closest
to the tire needs to be hung from square tubing and the other side may need to be hung from square
tubing as well.
Once you have installed the sander tanks, you should trim the top of the grit discharge boots to provide
4” ground clearance when the vehicle is loaded. Mount the boots (S124-6) on the outlets on the
aluminum operating unit (S40059) with the included clamps (S83-97). If necessary, we recommend
rotating the boots on the outlets to center each one in front of its corresponding tire.