Elston Manufacturing S-N100, Руководство пользователя

Страница: 11 / 26

Installation
9
Once you've determined the approximate mounting location, you will need to decide what type of
brackets will be used to mount the sander.
We provide mounting brackets for the traction sanders. These are:

The S10-02 mounting kit for S-N100 Quarterfender sanders

The S5-100 mounting kit for S-N661 and S-N861 sanders
Otherwise, the traction sanders can be installed using square tubing, angle brackets, or any other robust
configuration to securely fasten the sanders to the truck frame. Steel mounting setup must be strong
enough to support at least 5 times the weight of a fully loaded sander without permanently bending.
Aluminum configurations must be 8 times stronger for adequate stiffness and operating life. This level
of strength is recommended as the brackets bear a substantial amount of load other than the weight of
the sander due to bumps, constant stress, and corrosive winter chemicals which, in turn, increase the
risks of the brackets cracking and failing.
Figure 5: S-N100 Quarterfender sander installed using S10-02 mounting kit