Elsner 70631 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 32

background image

3

Safety and operating instructions

Sensor KNX T-UP gl

• Version: 05.09.2022 • Technical changes and errors excepted.

1.

Safety and operating instructions

Installation, testing, operational start-up and troubleshooting should
only be performed by an authorised electrician.

CAUTION!
Live voltage!

There are unprotected live components inside the device.

• Inspect the device for damage before installation. Only put undamaged devic-
es into operation.
• Comply with the locally applicable directives, regulations and provisions for
electrical installation.
• Immediately take the device or system out of service and secure it against un-
intentional switch-on if risk-free operation is no longer guaranteed.

Use the device exclusively for building automation and observe the operating instruc-
tions. Improper use, modifications to the device or failure to observe the operating in-
structions will invalidate any warranty or guarantee claims.
Operate the device only as a fixed-site installation, i.e. only in assembled condition and
after conclusion of all installation and operational start-up tasks, and only in the sur-
roundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.

For information on installation, maintenance, disposal, scope of deliv-
ery and technical data, please refer to the installation instructions.

2.

Description

The

Sensor KNX T-UP gl

measures the room temperature. The indoor sensor can

receive an external measured value via the bus and process it with own data to an
overall temperature value (mixed value).

The

KNX T-UP gl

provides adjustable threshold values. The threshold value outputs

and further communication objects can be linked by AND and OR logic gates.
Additionally, an integrated actuating variable comparator can compare and output
values that are received via communication objects. The sensor has integrated PI
controller for a heating/cooling system.

The device is completed with a frame of the switching series installed in the building
and thus merges with the interior.

Functions:

•

Measurement of

temperature

•

Mixed values

from own measured value and external values (proportions can

be set in percentage)

«
...
3
4
5
6
7
...
»

Содержание 70631

































Отзывы:

Нет отзывов

Похожие инструкции для 70631

Бренд: Palm Страницы: 14

Бренд: Toco Страницы: 12

Бренд: ABB Страницы: 27

Бренд: Larry vs Harry Страницы: 20

Бренд: Panasonic Страницы: 16

Бренд: Kampmann Страницы: 32

Oakville Series

Бренд: Napoleon Страницы: 72

Бренд: Napoleon Страницы: 4

Allure Vertical Series

Бренд: Napoleon Страницы: 120

Бренд: Olympus Страницы: 2

KOOLZONE SAC-1800

Бренд: UNINEX Страницы: 5

Бренд: Vaillant Страницы: 80

Бренд: Panasonic Страницы: 4

Бренд: Daikin Страницы: 52

Бренд: Westin Страницы: 3

Бренд: dol sensors Страницы: 4

PECOS Universal

Бренд: Speed Link Страницы: 4

Бренд: Bamo Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды