elsner elektronik 70516 Скачать руководство пользователя | Manualshive

Страница: 55 / 60

background image

53

Parameter setting

Actuator KNX S1R-BA4-UP 24 V

• Version: 27.05.2020 • Technical changes and errors excepted.

6.2.5.3.Blocking function (switch functions)

The menu item "blocking function" appears only for the settings for the switch function
channel if selected "Use blocking functions: Yes".

The output channel can be blocked by a block telegram. What happens during the
blocking, for bus voltage return and after the blocking is set here. The manual
operation is then not possible for an active block.
The function can be used for example for a light, which is turned on when pressing a
"panic button" (=trigger for blocking function) and cannot be turned off any longer.

6.2.5.4.Button input (switch functions)

Depending on the model, there are no inputs, two or four inputs.

The inputs can be used as actuator button or bus button. If a temperature sensor (eg.
T-NTC) is connected, the input is configured as a push button with function
„temperature sensor (NTC)“.

Input as bus button

Input as actuator button

If the input to the control of the device is used at this channel, then specify the button
function.

If a button with switch function is assigned to the input, select the button function
"Switch" and specify what happens when pressing/releasing the button and when to
send.

Staircase light time can

not be triggered again • can be triggered
again

Off telegram during staircase light period
affects

nothing • direct turn off

Blocking function blocks for

0 • 1

Value of the blocking object
after bus voltage returns

0 • 1

Response when blocking

no change • opened • closed

Response upon release

follows switch command • opened • closed

Operating mode

Use input 1 / 2 (3 / 4)

• no
• as a bus button
• as an actuator switch

Button function

Switch• Selector switch

Button function

Switch

«
...
53
54
55
56
57
...
»

Содержание 70516





























































Отзывы:

Нет отзывов

Похожие инструкции для 70516

Бренд: ABATEC Страницы: 8

Бренд: M&C Страницы: 16

Бренд: Jafar Страницы: 10

Бренд: Barthelme Страницы: 8

Бренд: CAB Страницы: 28

Бренд: C-TEC Страницы: 16

Бренд: C&T Solution Страницы: 27

SECURIT ST800L+

Бренд: C&K systems Страницы: 16

Бренд: Jabra Страницы: 4

Бренд: Jedia Страницы: 12

Бренд: JED Micro Страницы: 10

Бренд: JCM Technologies Страницы: 2

Бренд: Samson Страницы: 78

Бренд: Mamas & Papas Страницы: 44

Бренд: Mamas & Papas Страницы: 8

Бренд: Omegalink Страницы: 2

Бренд: MamaLove Страницы: 9

Бренд: Taoglas Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды