elsner elektronik 70516 Скачать руководство пользователя | Manualshive

Страница: 38 / 60

background image

36

Parameter setting

Actuator KNX S1R-BA4-UP 24 V

• Version: 27.05.2020 • Technical changes and errors excepted.

Moving position (for awnings and blinds):
------------------------------

Use teaching object for new shading position

: The curtain position it can be

specified numerically or taught manually. For teaching set "use teaching object: Yes"
and the "channel X shading position teaching object" is used for saving the position
reached. Saving occurs for value = 1 and can for example be realized via a button linked
to the teaching object. Numerical specifications already set are overwritten by the
teaching object.

6.2.1.5.Automatic for windows (drives)

The menu item "Automatic" only appears if internal automatic is selected for "Control".
Depending on the setting, the internal automatic functions take the outdoor
temperature, indoor temperature and room air humidity into account, and allow forced
ventilation via a communication object.

In order to fully utilize the internal ventilation automatic, information about the outdoor
and indoor temperature and the inside air humidity must be present in the bus system.

Cold supply air lock:

The input object "cold supply air block" is linked with the output object of a
temperature sensor. The input object can be a 1bit object (smaller or larger than a
threshold value), as well as a 16bit object (measurement value).

1bit input object:

Ventilation is allowed if the bit is 0 and blocked if the bit is 1.

16bit input object:

Ventilation is allowed if the measurement value is larger than the threshold
value+hysteresis
and blocked if the measurement value is smaller than or equal to the threshold value.

Awning position in % or
blind position in %

0 … 100; 75

Use teaching object for new shading
position

no • yes

Use cold supply air block

no • yes

Use cold supply air block

yes

Type of temperature input object

1 bit • 16 bit

Type of temperature input object

1 bit

Type of temperature input object

16 bit

Threshold value in 0.1°C

-300 … 800; 50

Hysteresis in 0.1°C

1 … 100; 20

Send current blocking status

no • yes

«
...
36
37
38
39
40
...
»

Содержание 70516





























































Отзывы:

Нет отзывов

Похожие инструкции для 70516

FPBA-01 PROFIBUS DP

Бренд: ABB Страницы: 2

ControlMaster CM15

Бренд: ABB Страницы: 4

Бренд: Quectel Страницы: 23

Бренд: Quectel Страницы: 79

Бренд: Easy-Laser Страницы: 84

Бренд: Easy Heat Страницы: 4

Бренд: FAAC Страницы: 4

Бренд: FAAC Страницы: 52

Бренд: LAE electronic Страницы: 7

Бренд: LAE electronic Страницы: 2

Бренд: Laird Страницы: 38

Бренд: Laird Страницы: 5

Бренд: RADEMACHER Страницы: 68

Бренд: Patron Страницы: 36

Бренд: ABB Страницы: 17

Бренд: Multi-Clean Страницы: 4

Бренд: Primo Water Страницы: 10

Бренд: PENGWYN Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды