6
Installation and start-up
Brightness and Wind Sensor KNX LW sl
• Status: 05.11.2014 • Errors excepted. Subject to technical changes.
2.3. Device design
2.4. Sensor assembly
ATTENTION!
Even a few drops of water can damage the device electronics.
•
Do not open the device if water (e.g. rain) can get into it.
Fig. 5
1
Programming LED
2
Brightness measurement
3
Wind measurement
4
Programming key on the underside of the housing (recessed),
ATTENTION!
Sensitive wind sensor.
•
Remove the protective transport sticker after installation.
•
Do not touch the sensor on the wind measuring element (no. 3).
3
1
2
4