2
Description
Camera Interface for WS1 Color and WS1000 Style
• Status: 07.03.2016 • Technical Changes and Errors reserved.
1.
Description
The
Camera Interface for WS1 Color and WS1000 Style
allows video cameras to
be connected to the control unit. The camera images are shown on the screen.
Functions:
•
For 2 video cameras
•
Display of the images on the control unit screen. Camera image can be
switched on and off via buttons on the screen or via signal in the
multifunctional input (configuration as binary input)
1.1. Scope of delivery
•
Interface to be screwed into the screen board of the control unit
1.2. Technical Data
The
Camera Interface
is suitable for the WS1 Color or WS1000 Style control with
software 1.492 or higher. The software version is displayed with each start of the con-
trol system (new start in menu: System > WS1 settings > Service > Reset).
The product conforms with the provisions of EU directives.
2.
Installation and Commissioning
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components within the device.
•
VDE regulations and national regulations are to be followed.
•
Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
Installation
to be screwed into the screen board on the control unit
Dimensions
approx. 42 x 16 x 40 (W x H x D, mm)
Weight
approx. 10 g
Ambient temperature
Operating 0…+50°C, storage -30…+70°C,
avoid condensation
Inputs
2 x video cameras via Cinch connectors, 1 Vss/75 ohm,
video standard CCIR/PAL
