Elsema iS260, Руководство пользователя

Страница: 6 / 11

iS260/iS260D SWING GATE OPENER MANUAL
C. INSTALLATION OF REAR BRACKET
Step 1
: Before securing the rear bracket to the pillar check the front bracket to make sure can be
welded to a solid point on the gate leaf.

Fully close the gate. Fully extend the motor shaft. This will be the gate’s fully closed position

Connect the rear and front brackets to the motor

Hold the rear bracket onto the pillar with the calculated A and B values.

Move the motor in a vertical direction until the fixing zone is in a solid area of the gate leaf for
the front bracket.

For inward opening, the fully extended motor shaft will be the closed limit of the gate.

Open position of the gate is adjustable by the shaft clamp.
Step 2: Then fix the rear bracket to the pillar.
Step 3: Fix the operator on the rear bracket.
4