Elsema Gigalink GLR2702, Руководство пользователя

Страница: 3 / 8

ELSEMA
2-Channel 27MHz GIGALINK™ Receiver with relay outputs, GLR2702
- 3 -
Technical Data
Supply Voltage
11.0 to 28 VDC and 10.0 to 28 VAC.
Can use Elsema AC power pack (PP12 or PP24).
Supply lines should be less than 3 metres long to comply with radio frequency
authorities.
Current Consumption
14mA standby at 12 VDC Supply
63mA if relay “ON” at 12 VDC Supply
Receiving Frequency 27.195MHz
Operating Temperature
Range
-5 to 50°C
Sensitivity 1uV (for output to activate)
Decoding System Microcontroller based 96-bit word
Code Combinations 4,294,967,296
Outputs Two change over relay outputs, rated at 8 Amps/240 Volts
Connections Supply, Antenna & Outputs: Screw type terminal block
Antenna
50 ohms, 27MHz CB-Antenna or approximately 1m long & 1mm thick piece
of wire
Dimensions 96 x 70 x 20mm
Mounting Hole Size 3.97mm or 5/32"
Weight 83g
Microcontroller Can be re-programmed to suit your customised needs
Useable Transmitters All Elsema Type 27MHz GLT-... series
Useable Operating Range
Up to 350m with proper 50 ohms, 27MHz CB-Antenna. Up to 200m with 1m
long antenna wire. Antenna wire should be extended and away from metal.
Ranges assume line-of-sight operation.