ELSA TanGo 2000, Руководство пользователя

Страница: 3 / 41

Preface
Thank you for placing your trust in this ELSA product.
With ELSA TanGo 2000, you have purchased an ISDN terminal adapter which will
permit you to take advantage of modern ISDN technology. Exacting manufacturing
standards and stringent quality control are the basis for high product standards and
consistent quality to ensure your fullest satisfaction with this ISDN adapter.
About this Manual
This manual will inform you about all aspects of your ELSA ISDN terminal adapter,
including the installation and use of the supplied software. It also contains an overview
of the AT command set.
Changes to this Manual
ELSA products are characterized by ongoing further development. It is therefore
possible that the information printed in this manual is not current in all points.
If you have questions to the topics covered in this manual or require additional help, our
online services (Internet server, newsgroups, ELSA LocalWeb and the CompuServe
forum GO ELSA) are at your disposal around the clock. The complete scope of support
and services provided by ELSA can be found in the chapters “Advice and help“ and
“ELSA-Service.“
Online Documentation
The ELSA TanGo CD contains extensive electronic documentation in addition to the
printed handbooks (Installation Guide, User Manual). This provides information on
topics such as the installation of access software, the online services or other support
notes. This information has been stored in HTML or PDF format. A browser (e.g.
Netscape Navigator or Microsoft
®
Internet Explorer) is required for reading and
printing HTML files. The ACROBAT Reader program is required to read and print PDF
files. It can also be found on the ELSA TanGo CD and may be installed using the CD
setup program.
To read the online documentation, proceed as follows:
a
Insert the included ELSA TanGo CD in your CD drive. The CD setup will start
automatically under Windows
®
95 and Windows NT
®
4.0. If you are using a
different operating system, please start the CD setup program (CDSETUP.EXE) on
the CD.
b
In the CD-Setup, go to Installation of: , mark the option Online Documentation
(with ACROBAT Reader) , and click Display .