ELSA TanGo 2000, Руководство пользователя

Страница: 19 / 41

Software on the ELSA TanGo CD
ELSA TanGo 2000
13
Installation of Telix for DOS
The terminal program
Telix Lite is included with your ELSA TanGo 2000. To install Telix
Lite on your computer, proceed as follows:
a
Insert the
ELSA TanGo CD in your CD drive (e.g. D:), switch to the
ELSAWARE\ENGLISH\DOS\TELIX
, directory and run the file
INSTALL.BAT
(
INSTALL.BAT
M
). Please read the following notes and press
M
.
b
Accept the suggested installation directory or enter the name and path of the
directory that you would like to use for the installation and continue with
OK . The
files will now be expanded and copied to your hard disk.
c
In the field
Name
, enter your User ID (the name must be at least 5 characters long).
In the field Serial Number , enter the serial number. The serial number may be
found on the enclosed serial number sticker (software license). Conclude the
installation by clicking
OK
.
d
Select
OK
to update your AUTOEXEC.BAT file or enter the modifications manually.
Read the README.TXT and continue the installation with
M
.
e
Enter the name of your ISDN terminal adapter or select it from the list and confirm
the selection with
M
. If your adapter is not in the list, select a compatible type
(e.g.
MicroLink ISDN TLpro).
f
Use the
T
key or the mouse to mark the COM port to which your ISDN terminal
adapter is connected and select the IRQ in the event that it deviates from the default
setting. Continue the installation with
OK .
g
Select OK to save the changes to the settings in the
Telix configuration file.
The computer must be restarted to ensure correct operation if the AUTOEXEC.BAT file
was automatically updated.
Starting
Telix
Enter
telix
M
in the
Telix directory to start the program. If you are starting Telix
for the first time, you will be prompted to configure the program before use.