Installation
ELSA MicroLink ISDN PCI
5
Make the first move
Safety First! Disconnect your PC from the main power supply before you open the hous-
ing!
Loosen the screws
Remove all retaining screws for the PC housing and pull the cover off.
Remove the blind bracket
Remove the slot bracket of a free slot.
Insert the
ELSA MicroLink ISDN PCI
board
Insert your
ELSA MicroLink ISDN PCI
board in this slot and securely fasten the mounting
bracket. Replace the PC housing and screw it tight.
Connect cable to the ISDN
Connect your
ELSA MicroLink ISDN PCI
board to the ISDN network by first plugging the
cable provided into the jack at the board mounting bracket and then plugging it into your
ISDN connector.
Reconnect the power cord to your computer with the power supply and switch the com-
puter on.
Insert
ELSA MicroLink ISDN PCI
CD
Insert your
ELSA MicroLink ISDN PCI
CD into your CD-ROM drive.
Installation under Windows 95 and Windows 98
Windows 95 or Windows 98 installation takes place in the following stages:
Hardware detection and installation of the drivers
K
Microsoft Accelerator Pack (Windows 95, unless you have this already installed)
K
ISDN tools
Almost all the windows appearing on your screen during installation can be confirmed by
clicking on the
OK
,
Finish
or
Next
buttons. The following information shows you exactly
where you will need to take any special steps.
If during installation the required files on the Windows CD are not found, try, for example,
the subdirectory D:\win95, D:\win98 or D:\windows.
1
2
3
4
5
6
Содержание MicroLink ISDN PCI
Страница 1: ...User Manual M ELSA MicroLinkTM ISDN PCI...
Страница 4: ......
Страница 10: ...Installation ELSA MicroLink ISDN PCI 4...
Страница 60: ...ISDN Connections ELSA MicroLink ISDN PCI 54...