ELSA MicroLink ISDN PCI, Руководство пользователя

Страница: 12 / 66

Installation
ELSA MicroLink ISDN PCI
6
Hello Windows, I am your new hardware!
Depending on your Windows version, the hardware detection takes place as follows:
c
Once the driver has been found, confirm with Next to start the installation.
Windows 95 only: installing the Microsoft Accelerator Pack
d
If Microsoft Accelerator Pack 1.1 is already installed on your computer, this point
will be skipped automatically. If not, you will be asked to install it now. Confirm the
request with
Yes so that you can use all the ELSA MicroLink ISDN PCI board service
features.
ISDN Configuration: moving on swiftly!
e
If you would like to use your computer as a server, enter one or two of your ISDN
subscriber numbers here (SPIDs are only needed for American D-channel protocols).
If you do not enter any numbers, the
ELSA MicroLink ISDN PCI will respond to all
incoming calls when in server mode.
Tools for the ISDN network
f
After restarting, insert the ELSA MicroLink ISDN PCI CD again. If the setup program
does not appear automatically, please start 'autorun.exe' from the root directory on
the CD. Select the point
Install ISDN Software in the initial window of the setup
program.
g
Follow the instructions of the setup program. Click the Finish button to copy the
ELSA- ISDN tools to your computer.
Windows 95,
Version 4.00.950 Windows 95,
Version 4.00.950 B Windows 98
a
Windows 95 reports
'New hardware found'.
Select 'Driver from disk
provided by hardware
manufacturer'. Windows 95 starts
'Update Device Driver
Wizard' and selects the
driver for you. Windows 98 starts
'Update Device Driver
Wizard' and selects the
driver for you. Select the
option 'Find best driver for
the device'.
b
The ISDN PCI board driver is on your
ELSA MicroLink
ISDN PCI CD. So change to the root directory of your
CD-ROM drive in the next window (e.g. D:\).
In the following window
activate the option 'CD
drive', lay the
ELSA
MicroLink ISDN PCI CD in
the drive and confirm with
Next .