ELSA AirLancer ISA-2, Руководство пользователя, Страница: 16 / 23

ELSA AirLancer
13
English
will not be full wired but only an access point to the company LAN will be established
with a
ELSA LANCOM Wireless L-2 base station.
Every marketing employee receives a
ELSA AirLancer MC-2 wireless network card for the
notebook computer so the employee can log into the company network while in the
office. To enable the marketing employees to print, there is also a network printer
connected to the LAN in their office.
Setting up the
wireless
network cards To enable the wireless network cards in the notebooks to log on to the base station and
exchange data with the LAN, the various parameters must have the same values as the
wireless network card in the base station.
Open the Network Neighborhood with Start
E
Settings
E
Control Panel
E
Network . Highlight the entry 'ELSA AirLancer MC-2' and choose the properties. Open
the register card 'Advanced' and check the values displayed:
K
Channel (from 1 to 13) must be set the same for all computers in the wireless
network; it can be left at the default setting 'Channel 11'.
K
LLC Type remains at 'IEEE 802.11' for all computers.
K
Operating Mode is set to 'infrastructure' for all computers in the peer-to-LAN
network.
K
Packet Size remains at the default value of '1550' for all computers.
K
WLAN Domain can be freely selected. This value must also be the same for all
computers.
Change this value on all radio stations from the default 'ELSA' to any other value as soon
as possible, because the WLAN Domain is used to protect your wireless network against
unauthorized access as with a password!
Infrastructure network